eSpray-2022.pdf
The eSpray is an ergonomic punch face and die wall lubrication system that continuously sprays dry lubricant onto tablet press tooling, delivering a consistent and verifiable amount of lubricant onto the product’s outer surface. It is an easy and efficient solution to cope with issues such as capping, sticking, too high ejection force, chemical incompatibility […]
Key benefitsThe eSpray is an ergonomic punch face and die wall lubrication system that continuously sprays dry lubricant onto tablet press tooling, delivering a consistent and verifiable amount of lubricant onto the product’s outer surface.
It is an easy and efficient solution to cope with issues such as capping, sticking, too high ejection force, chemical incompatibility with formulation, or poor dissolution.
The system applies only the needed amount of lubricant while vacuuming the excess directly from the nozzle to keep the production environment clean. It, therefore, helps to reduce the amount of dry lubricant in the blend, or even eliminate it in the case of new formulations.
The minimal quantity of lubricant sprayed externally onto the tablets can be accurately measured and validated below the threshold for listing as an ingredient in the formulation.
Get access to the whitepaper by filling out the form below
| Spray technology | Dual spray nozzle allowing upper punch, lower punch and die spraying and revacuuming of the exceed lubricant |
| Vacuum technology | Venturi system |
| Backup line & pressure monitoring | N/A |
| Lubricant dosing monitoring | Yes |
| Dosing calibration/validation protocol | Yes |
| Tablet press application | Any kind of tablet press (existing press or new project with integrated communication) |
| Press speed | No limitation |
| Tablet size | 1 - 28 mm |
| Spraying/Vacuuming nozzle | Standard - but can be customised to fit specific tablet press |
| Spraying rate | 1,5 - 15 g/min |
| Conveyor Material | Approved FDA |
| Contact parts finishing | RA ≤0,5 µm |
| Floor dimension | 800 x 1000 mm |
| Frame parts | Stainless steel 304 |
| Frame mounted on wheels | Yes |
| Material certificate | Available |
| IQ-OQ protocol | Available |
| Hepa filter | standard |
Close
info@pharmatec.be
+32 67 70 13 00
+32 67 70 13 00